Hi Experts,
I have created Inbound delivery in ECC and it has replicated to EWM.
When I checked EWM system I can see IDN.
I am trying to create ID for IDN but getting no success.
I can see ppf action failed for IDN.
Please check if anyone of you have come across such issue.
Thank you,
Regards,
Hi Folks,
I have done all necessary erp-ewm settings.
When I am creating ID for PO , I am getting below error :
Inbound delivery ****** could not be distributed.
Msg no. VL589
I checked VOFM transaction and found all settings for picking(11,111) ,Goods Issue(13,113) and Distribution (14,114)in Place.
Any pointer where I am missing.
Regards,
Hello Experts,
I am working on a scenario where once we receive products, we move them to an intermediate location. From Intermediate location product is moved to VAS work center. Once VAS activity is complete products are moved to final location.
In SAP EWM when my INB del is received VAS order gets created. Once material is packed ,Warehouse task is created to move product from GR-ZONE to ID point. Other tasks are also created in waiting status for VS02 STEP to move product from ID point to VAS work center and for IB03 STEP to move to final putaway.
The moment I confirm first task to move product to ID point, system is cancelling task for IB03 step. This is very strange and I have no clue why it is happening. Please guide me.
Hello Experts,
I have done all required settings for both ECC and ERP.
But when I checked erp-ewm check report ,it says RFC destination is missing for logical system.
Any pointers where I am actually missing the config.
BR,
Hello Experts
I am trying to do confirm the WT'S for PUTAWAY from GR-Zone (9010) to Bins in Storage Type 0010 for an ID .But I am getting the above error,I think I have not set up the Availability Group settings properly.
Pls suggest
Configure Availabilty Group node-
Assign Availability Group to Storage Type Node- below screenshot for Destination Storage Type 0010
Map Storage Locations from ERP System to EWM System-
Default Values for Posting Change Node- No value maintained for WPT 1010
Regards
Akhil
Hi Folks,
System is not determining WPT during Inbound delivery creation.
I checked :
Storage type search seq.
WPT determination
Product Master setting
Document Type
WPT
Everything are in place but why system is not determining WPT .
Also what can be the reason for block.
Thank you in advance.
Regards,
SS
Hi Folks,
I have confirmed the WT with same quantity as of inbound delivery created in EWM.
After confirming WT I see the message " Quantity in source bin will be negative "
I am wondering why system giving this message though I have confirmed WT with same quantity.
Regards,
SS
Dear Experts,
I need to set up a little complex warehouse. This warehouse will have stocks supplied by vendors and in many cases will be owned by the vendors (vendor consigned stocks). I just tried a test and found that stocks received carries the vendor as the owner, but the outbound delivery that comes to pick this does not have owner field (as vendor) in the outbound delivery order?? Am I missing something?
There may also be stocks purchased by the warehouse (owner = party entitled to dispose). Sometimes we also may have to reserve the stock for some customers based on their request . This stock that needs to be reserved, may be vendor owned (owner = vendor) or may be warehouse owned (owner = party entitled to dispose). I am not very sure on how I can reserve the stock for a customer... I can see SOS (Sales order stock) in /SCWM/POST. So, can I assume that you will have to do posting change in ewm, against a request from customer. Is there any other way to reserve the stock for a customer? Will this stock be automatically identified for picking the outbound delivery order for this sales order comes to EWM from ECC?
I am not sure If I need to set up a third party warehouse for handling this... Do I need to then have different party entitled to dispose in EWM for each customer connected to different plants in ECC? W
Thanks
George
Hi EWM Experts,
We have stock removal strategy Stringent FIFO which proposes the oldest quant in the entire warehouse as the quant to be removed from stock.
For SLED based stock removal do we have any called Stringent SLED (similar to Stringent FIFO) which proposes products with the oldest shelf life expiration date are removed from stock first in the entire warehouse.
Appreciate your early reply.
Regards
Ramesh.R
Hi Experts,
How does Order based Replenishment works with Open Warehouse Request.
We are facing issue in this method. Replenishment is not getting triggered.
Config in place but any prerequisites to be completed before it.
Appreciate your suggestion & quick reply.
Thanks & Regards
Ramesh.R
Hi everyone,
Scenario:- I have create inbound delivery & Create the task for unload. After the unload task confirmed system not create another task
And one queue stuck on SMQ2 and I check the log . Please advise what to do, perhaps Im missing some config or settings.
Below is the log:
***** HU WT Creation for HU 2676 *****
Storage control active for HU 2676 with storage process ZDEC
***** Putaway Warehouse Task Creation for HU 2676 - Start
***** Product WT Creation *****
For warehouse request PDI 963 10
For product 10000883; quantity 45.00000000000000 EA
***** Determine source data - start *****
Source HU 2676 entered; storage type: ; storage bin:
Determining source data with storage type:9010, section:, bin:GR-ZONE, HU:2676
Source storage type 9010 defined
Storage type search fully defined: No entry found
Storage type search with wildcard: No entry found
Determine stock in source storage type 9010
Determine stock in source storage bin GR-ZONE
Storage bin GR-ZONE is not assigned to any physical inventory area
Source storage bin GR-ZONE determined in storage type 9010
Handling unit type E1 determined
***** Determine destination data - start *****
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence KBSS and rule 2 found
Storage type search sequence KBSS found
Destination storage section check is not active in storage type KB30
HU type check is not active in storage type KB30
Split during putaway active for storage type KB30
Destination storage section check is not active in storage type GENR
HU type check is not active in storage type GENR
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: KB30 storage section: **** bin type: T030 whse pos. eval.: 00000
Storage type: KB30 storage section: **** bin type: whse pos. eval.: 00000
Storage type: GENR storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: KB30, stor.area: ****, bin type: T030, stock mvmt: 00000 being examined
Storage type KB30: HUs not allowed
Standard putaway behavior (storage type KB30)
Split during putaway active for storage type KB30
Determining a fixed bin (storage type KB30)
Maximum weight (incl. tolerance) for LocationK01-08-C01 was exceeded by 3,500 KG
Maximum weight (incl. tolerance) for LocationK01-08-C01 was exceeded by 3,500 KG
Capacity check against storage bin K01-08-C01
Weight: 1,000 KG are checked
against free capacity 1,000 KG with tolerance 0 KG
Partial qty 10.00000000000000 is put away in storage bin K01-08-C01 (product:10000883,storage type:KB30)
Split Occurred - Detailed information
Stor. bin K01-08-C01 found and assigned to product 10000883 as a fixed bin
HU was checked successfully
Dest. QTY 10.00000000000000 EA was determined (storage type: KB30, storage bin:K01-08-C01)
***** Determine source data - start *****
Source HU 2676 entered; storage type: ; storage bin:
Determining source data with storage type:9010, section:, bin:GR-ZONE, HU:2676
Source storage type 9010 defined
Storage type search fully defined: No entry found
Storage type search with wildcard: No entry found
Determine stock in source storage type 9010
Determine stock in source storage bin GR-ZONE
Storage bin GR-ZONE is not assigned to any physical inventory area
Source storage bin GR-ZONE determined in storage type 9010
***** Determine destination data - start *****
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence KBSS and rule 2 found
Storage type search sequence KBSS found
Destination storage section check is not active in storage type KB30
HU type check is not active in storage type KB30
Split during putaway active for storage type KB30
Destination storage section check is not active in storage type GENR
HU type check is not active in storage type GENR
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: KB30 storage section: **** bin type: T030 whse pos. eval.: 00000
Storage type: KB30 storage section: **** bin type: whse pos. eval.: 00000
Storage type: GENR storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: KB30, stor.area: ****, bin type: T030, stock mvmt: 00000 being examined
Storage type KB30: HUs not allowed
Standard putaway behavior (storage type KB30)
Split during putaway active for storage type KB30
Determining a fixed bin (storage type KB30)
Mixed storage in HU for storage type KB30 failed due to BAdI implementation
Maximum weight (incl. tolerance) for LocationK01-08-D01 was exceeded by 2,500 KG
Capacity check against storage bin K01-08-D01
Weight: 1,000 KG are checked
against free capacity 1,000 KG with tolerance 0 KG
Partial qty 10.00000000000000 is put away in storage bin K01-08-D01 (product:10000883,storage type:KB30)
Split Occurred - Detailed information
Stor. bin K01-08-D01 found and assigned to product 10000883 as a fixed bin
HU was checked successfully
Dest. QTY 10.00000000000000 EA was determined (storage type: KB30, storage bin:K01-08-D01)
***** Determine source data - start *****
Source HU 2676 entered; storage type: ; storage bin:
Determining source data with storage type:9010, section:, bin:GR-ZONE, HU:2676
Source storage type 9010 defined
Storage type search fully defined: No entry found
Storage type search with wildcard: No entry found
Determine stock in source storage type 9010
Determine stock in source storage bin GR-ZONE
Storage bin GR-ZONE is not assigned to any physical inventory area
Source storage bin GR-ZONE determined in storage type 9010
***** Determine destination data - start *****
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence KBSS and rule 2 found
Storage type search sequence KBSS found
Destination storage section check is not active in storage type KB30
HU type check is not active in storage type KB30
Split during putaway active for storage type KB30
Destination storage section check is not active in storage type GENR
HU type check is not active in storage type GENR
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: KB30 storage section: **** bin type: T030 whse pos. eval.: 00000
Storage type: KB30 storage section: **** bin type: whse pos. eval.: 00000
Storage type: GENR storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: KB30, stor.area: ****, bin type: T030, stock mvmt: 00000 being examined
Storage type KB30: HUs not allowed
Standard putaway behavior (storage type KB30)
Split during putaway active for storage type KB30
Determining a fixed bin (storage type KB30)
Mixed storage in HU for storage type KB30 failed due to BAdI implementation
Mixed storage in HU for storage type KB30 failed due to BAdI implementation
Maximum number of fixed bins (2) reached in storage type KB30
Stor.type: GENR, stor.area: ****, bin type: , stock mvmt: 00000 being examined
Storage type GENR: HUs allowed but not required
Standard putaway behavior (storage type GENR)
Capacity check against storage bin GENR-BIN-003
Weight: 2,500 KG are checked
against free capacity 999,999,999,999.999 KG with tolerance 0 KG
Storage bin GENR-BIN-003 was found (storage type GENR)
HU was checked successfully
Dest. QTY 25.00000000000000 EA was determined (storage type: GENR, storage bin:GENR-BIN-003)
***** Putaway Warehouse Task Creation for HU 2676 - End
Storage process step IB02 determined for HU 2676
Destination data set to 8010 due to storage control
Warehouse process type set to 3060 due to storage control
***** Determine source data - start *****
Source HU 2676 entered; storage type: 9010; storage bin: GR-ZONE
Handling unit type E1 determined
Determine stock in source storage bin GR-ZONE
Source storage bin GR-ZONE determined in storage type 9010
***** Determine destination data - start *****
Defaults for destination data: StorType:8010 Handling Unit:00000000000000002676
Destination storage type 8010 checked successfully
Destination storage section check is not active in storage type 8010
HU type check is not active in storage type 8010
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: 8010 storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: 8010, stor.area: ****, bin type: , stock mvmt: 00000 being examined
Storage type 8010: HU requirement
Standard putaway behavior (storage type 8010)
Capacity determined from HU 2676
Queue determination started with SFZ1/9010/8010/ /3060/ / /PTWY
Queue determination number 00001 with X/X/ / /
Queue not determined with SFZ1/9010/8010/ / /
Queue determination number 00002 with X/ / / /
Queue not determined with SFZ1/9010/ / / /
Queue determination number 00003 with / / /X/
Queue not determined with SFZ1/ / / /3060/
Queue determination number 00004 with /X/ / /
Queue determined with SFZ1/ /8010/ / /
Queue DECON-COM determined
Engineered Labor Standards Calculation
Work Steps for Selection SFZ1 8010 IB02 A:
Work step sequence: 0002 - step: 0002 - 00000
Condition: - constant: 5.000 - unit: MIN - formula
Overall result: 5.000 MIN (ELS was calculated: X)
Confirm still-unconfirmed product warehouse tasks for HU 2676
Confirm still-unconfirmed product warehouse tasks for HU 2676
An internal error has occurred
Regards
Ankit Kaushik
Hi,
GR is done in EWM but not updated in ECC.
I found queue in SMQ2(Inbound Queue)
Please find the error msg of inbound queue in ecc
Regards,
Sunil
Hello together,
is it possible that the Value for the field within /SCWM/MAT1 in Storaga type data "Min.Qty (%of Max. Qty) is determined by the system automatically?
I did the customizing "Define Storage Type Parameters for Slotting" and entered 15 in Max./Min. Qty.
After activating the values via /SCWM/SLOTACT it is not maintaining the value in MAT1.
Does somebody know why?
Thank you.
br
Fatih
Hi ,
I am new to EWM .
I am trying to create a WT but system throws below error
No Bin Search Possibe Storage Types/Sections/Bin Types is incomplete
As I know I have done all sort of settings for Storage type/section/bin types search sequences.
What is preventing me to create WT.
Thanks,
Abhishek
How could I update Min Target Stock & Max Target Stock in MM43?
Hello Experts,
I have confirmed WT and Goods Receipt is updated in EWM.
But in ECC it is not updated ,because queue is stuck in SMQ2 of ECC
Message No. HUSELECT040
Packaging material is created in EWM system .
I believe I have completed all config. in both system.
But curious to know about this issue.
BR,
Olet
Hi gurus,
I create an outbound delivery in ERP and it is sent to EWM, EWM activates it automaticaly. Then I decide to cancel (delete) the outbound delivery. Altough the status of oubound delivery order is "not started", when i try to change it using VL02N system does not allow to change it. Posts an error message " The delivery was distributed, meaning that processing occurs in another system. The report back has not yet been received.".
What do you advice me to do.
Regards.
Hello Experts ,
We have below scenario
The HU need to be created automatically when we confirming the WT from Staging to final Storage Bin. I have created the Pack specification for that material . but system is not generated the auto HU and asking the maintain the destination HU while confirming the WT.
Anybody have idea about this ?
Thanks and Regards
Pavan
How to transfer stock from Stock type F1 to stock type F2 in EWM ?? I am unable to post goods issue for OD. stock is available in F1 (100 EA) but storage bin determination is showing stock type F2.
Regards,
Shashi
Dear Experts,
Inbound Driven - EWM Opp. Cross Docking.
On Inbound Delivery creation my first task is Unloading WT getting created, on confirmation of Unloading WT the Goods Receipt is triggered.
Due to the Unloading Task created initially the EWM Inbound Opp, Cross Docking is not getting triggered.
My Query, before goods receipts if any task created for the Inbound Delivery will the Cross Docking trigger (or) not
Kindly suggest...
Thanks in Advance
Regards
Ramesh.R