Dear Experts,
How can we configure Process oriented storage control and layout oriented storage control in EWM? I mean is there a specific customization node for this?
Any thought on this will be much appreciated.
For example, I want to work with only Process oriented storage control. What are the customization to be made?
Regards,
Shetty
Dear Gurus,
Could anyone explain how the fields "TDELIVERY - Delivery Date/Time" & "TOUTYARD - Departure from Yard" is getting populated or how its being fetched in the ODO, in "Dates/Times" tab in PRDO screen.
Hey there!
Pls, I need your help..
I've integrated ECC and EWM systems and sent master data from ECC to EWM through transactions CFM1 and CFM2.
After executing some activities among both systems to confirm it was communicating fine, I created a background job following these steps:
1. deactivate all active versions of IM
2. delete all inactive versions of IM
3. create a new IM for CIF
4. activate the new IM
Afterwards, I've got an error log telling that "BP x already exists" (message R1286).
I tried to delete these BPs and the error logs were "Location x of type 1010 (BSG ZBUSGRP) already exists in APO" (message /SAPAPO/LOM060) and "No mapping entry for x 1010 ZBUSGRP" (message /SAPAPO/LOM007).
So, I'm going from an error to another.
Please, could you help me to solve that?
Best regards.
Hello Experts,
We are using batch management in ewm.
Batch is replicating from ecc to ewm but class and characteristics are not appearing in EWM.
In ECC
Class Type 023 created and assigned to Org.Area W to below tables :
MCHA
MARA
In EWM
Class Type 230 created and assigned to Org.Area W to table /SAPAPO/MATKEY and /SAPAPO/VERSKEY
We did CFM1 and CFM2 and check CL02 but class and chars are not replicating .
Can I get some clue where I am missing ?
BR,
Olet
Hi friends,
I am new to ewm ,so please bear me if I ask any wrong question.
I have confirmed putaway WT,now the stock is in Bin location.
How to move it to GR-Zone so that I can return it to vendor.
Regards,
Abhishek
Dear Guru,
my scenario:
1. Worker enter Exception Code;
2. WF start and create PI document for the product in bin;
3. EWM offer next bin with same product;
4. If next bin not found;
5. Adjust outbound delivery with Difference Quantity.
Everything works fine, exept step 5: Delivery adjust, if i customize for exeption code, delivery adjust with code O001, EWM does not offer alternative bin for the product and immediately adjust delivery qty, and close WT.
Any solution, logic, customazing missing?
Examples of /SCWM/IF_EX_EXCP_EXC_FUNC?
Thx in advice.
Hi,Gurus
What is the meaning of change Pr/Batch and Qty Diff.All?
Hi
Thank you!
BR
Zhao
Hi all,
Where i can assign bin capacity to store number of HU's ?
Also where we define HU capacity to store number of SKU ?
Thanks
Sunil
Hi Experts,
Please help us if you have worked subcontracting process with EWM.
Right now we are able to receive finish good in ECC and EWM but we are not able to receive byproduct in goods receipt in ECC and hence in Inbound delivery of ECC. Further this can not be received in EWM as not in Inbound delivery.
The byproduct is already part of BOM and hence understand that it shall be automatically received in ECC with Inbound delivery creation and CIF to EWM.
Please give your insight on this and share document if you have. Appreciate your time.
Thanks & Regards,
Prashant
Hi All,
When i assign a Transportation Unit(TU) to an Inbound Delivery(ID), i am getting this error message:
Message no. /SCWM/SHP_RCV545
I have created the TU and marked it "Inbound". Even though i mentioned the same means of transport in both TU and ID, the system still gives me the same error.
Anything else that i need to check to get rid of this message?
Regards,
Nikhil
Hi experts,
is it possible to group positions of same material for warehouse task creation?
Example:
One pallet has qty of 55
My order in ERP has one position of 50 and additional one with 5 (free of charge) - in sum it's 55 and one pallet.
When creating tasks, system wants to create 2 positions, one for 50 and one for 5 (so 2 times "case pick").
In sum it would be one pallet with 55...
I tried creating delivery groups for those 2 positions - fine, but the task creating is still based on the 2 positions, not on the group.
Thanks for any idea
Michael
Hell,
o I have a scenario in STO that there is a additional HU on the truck but missing in IBD, we have planned to use exception code HUAD for the same, but I am unable to execute, I am getting a error saying cannot use the exception code. can some one help me with the steps to use the exception code HUAD in IBD.
Regards,
Srikanth
Hi All
I have a very basic question. Currently I am working on the business scenario's as mentioned below.
For the flow of IDOCs from SAP to 3rd party warehouse we will use standard SAP Idocs.
Now my very basic query is that what is the SAP transaction through which I can see standard SAP IDocs to be used for inbound and outbound delivery?
I searched SCN for Idoc for outbound delivery and came to know I can use message type DESADV and IDoc type DELVRY03. Now my query is what is the difference between message type and Idoc type and how can I search in system which message type and Idoc type to use for a scenario?
Hope I am clear in my query.
Regards
SK
Dear Experts,
I am getting below error during Warehouse order confirmation.
Message No. /SCWM/HUFUNCTIONS121
Please find warehouse number control settings for my warehouse
Weight Unit LB Time Unit MIN
Volume Unit FT3 Unit of Length FT
Currency USD Factory Calend. US
Please advise what I am wrong. and when I am debug the conversion happening twice.
Step1) KG, LB
Step2) LB, FT3(failed)
Please advise.
Regards,
Vadamalai A.
Dear Gurus,
I have one query with capacity check against the storage bin, If we activate the capacity check as per key figure either product ,packaging material 'or' both, system can check weight 'or' volume.
Now I want go with the volume check.
Here , i have cubic bins with the Edge Length = 1 foot and volume is '1 cubic foot'.
If , i try to store a cylindrical shape product with base radius 0.51 foot & height 1.1 foot with the volume 0.90 ( approx) cubic foot, system can allow as per the volume check , since product volume is less than the bin volume.
But, in real, that product can not fit in the bin.
Is there any provision to over come this kind of scenarios ?
Best Regards
C K REDDY
Does ISU support Multilevel Packing of HU (3 level)?
Example:
| Z11 | ||
| Y11 (Material 1 = 1KG) | ||
| Y12 (Material 1 = 1KG) | ||
| Y13 (Material 1 = 2KG) |
Hello Expert
One of our user posted Inventory difference with /SCWM/DIFF_ANALYZER but transaction did not made to ERP (ECC) system. Does anyone know what could be the root cause? I checked system log SLG1 in eWM and ECC could not find any error.
Thanks
Ankit
Dear Experts,
How can we configure Process oriented storage control and layout oriented storage control in EWM? I mean is there a specific customization node for this?
Any thought on this will be much appreciated.
For example, I want to work with only Process oriented storage control. What are the customization to be made?
Regards,
Shetty
Hi gurus,
I create an outbound delivery in ERP and it is sent to EWM, EWM activates it automaticaly. Then I decide to cancel (delete) the outbound delivery. Altough the status of oubound delivery order is "not started", when i try to change it using VL02N system does not allow to change it. Posts an error message " The delivery was distributed, meaning that processing occurs in another system. The report back has not yet been received.".
What do you advice me to do.
Regards.
Hello guys,
I have a requirement that I need to program but I'm new to EWM. We are implementing SAP in our company and for the warehouses, we are using EWM. So basically, our picker have RF guns and they use it to scan the items and pick.
Now in one of our warehouses, we have old material numbers on the products. We have 2 options to fix this, we can spend a lot of money to re-labelling the warehouse or option 2, we can find a User-Exit to use to convert the old material number to the SAP material number.
Now what I think should be possible to do is when a picker scan the item (old material number), it should hit a User-Exit which will check if its a material number in SAP master data and if its not, then it should go to a Custom ZTable where we would have defined old material number to match the new SAP material number and it should return this new material number to the RF Gun.
Now my question is, is there a User-Exit we can use for this and what will be the name of the User-Exit. Will this needs to be programmed in EWM?
Thanks.