I have very basic question. need a detailed clarity.
When I am checking the document for ware house structure (from best business practices) I noticed rack storage for small parts.
Bin characteristics says 1 europallet per bin. Storage type characteristics says HU is not allowed.
If HU is not allowed for the storage type - how a pallet is placed in the storage bin?
to me both are contradictory statements. can any one throw some idea..
your help is very much appreciated.
Hi All,
I would like to know from which table or by using which FM can I get the pick, pack and load status of an ODO item? I tried using the /SCWM/ORDIM_C/O/L tables by finding out the corresponding wave. But, from these table I'm able to get the PICK and pack WTs but not able to get the staging WTs.
Please help!!!
Thank you!
Best Regards,
Sriram.
Hello Experts
When I was creating the Product in EWM (/n/scwm/mat1 ) system is not showing the Party Entitle to Dispose in Drill down .
I have Checked the tables /SAPAPO/LOC and /SAPAPO/LOCMAP and found that - Three are two entries for my plant with two Locations like PLCBLR and SUCBLR.
I believe the above this the issue in not showing the plant while creating the product master . Could any one tell me why it is showing twice ?? and Why not it is showing the same for my plant while creating the product master ? Am I missing any Configuration assignments ?
Thanks and Regards
Pavan G Kulkarni
Hi All
I have a very basic question. Currently I am working on the business scenario's as mentioned below.
For the flow of IDOCs from SAP to 3rd party warehouse we will use standard SAP Idocs.
Now my very basic query is that what is the SAP transaction through which I can see standard SAP IDocs to be used for inbound and outbound delivery?
I searched SCN for Idoc for outbound delivery and came to know I can use message type DESADV and IDoc type DELVRY03. Now my query is what is the difference between message type and Idoc type and how can I search in system which message type and Idoc type to use for a scenario?
Hope I am clear in my query.
Regards
SK
Hi Experts,
I am facing issue while assigning the door to TU. Every time i assign the door, it is prompting with some time which i really dont understand.
I am new to EWM,Kindly help.
Hi Experts,
When i am trying to create a Warehouse Task with an inbound delivery, the system is throwing an error as this.
I maintained necessary strategies.
When we see the error, system is able to determine my storage type, but some where i am missing the master data.
I have maintained the HU type in product master data.
Kindly help.
Dear All ,
I am trying to execute process oriented storage control steps . kindly refer below screen shots of steps followed.
As below my storage process has 3 steps , Unload - IB01 , Deconsolidate- IB02 , Putaway- IB03 .
My requirement is to complete 3 steps in sequence thereby confirming final inventory to storage bin.
First step IB01 "unload" in storage process worked correctly as below .
When creating task to move HU i am getting error.
I have defined consolidation group as below .
My Query's are as below.
1. Why system is directing inventory to destination bin as it should be executing storage process step2: IB02 and inventory should have been directing to deconsolidation work center.
2. I have defined consolidation group but error persists.
Kindly guide me on error , please let me know if you need any further information.
Thanks
Jinoy
Hello all ,
Can anybody help me in 2 step picking , the scenario is like this :
picking > packing > goods issue area (the material flow ),
please kindly tell me the configuration steps.
Thanks in advance.
acs
Hi gurus,
I create an outbound delivery in ERP and it is sent to EWM, EWM activates it automaticaly. Then I decide to cancel (delete) the outbound delivery. Altough the status of oubound delivery order is "not started", when i try to change it using VL02N system does not allow to change it. Posts an error message " The delivery was distributed, meaning that processing occurs in another system. The report back has not yet been received.".
What do you advice me to do.
Regards.
Hi,
We are using ECC 6.0 and it is connected to the SCM 7.0.
We do use EWM funcationality and for that we need to update the two
tabs (MM01) i.e. WM Execution and WM Package.
We are unable to find these tabs in the MM01 while maintaining/creation of material (ECC).
Please do suggest what need to be done to acheive this.
Regards,
Ramana Rao.
In the RF Framework we use method set_ltrans (of class (/SCWM/CL_RF_BLL_SRVC) to dynamically jump between different logical transactions. However in this method the statement CALL TRANSACTION is called. Every time this is done a new gui session is opened. Therefore after the 6th or 7th call (depending on the actual setting of the system) the RF Framework stops with error message "Maximum number of internal sessions".
Can anyone please advise how to avoid this error? Is there an error in the above mentioned method?
Any help is appreciated.
/John Kristensen
Hi,
In RFUI, Im trying to add a new screen in Receiving HUs section.
For this I created a new screen in the Template and did the relevant config changes .
But I need to create a new Function module to add functionality for this new screen.
My question is : How do I create this new FM? Should I need to create a custom function group?
There is a standard function group . Do I need tro create the new FM here ?
Please suggest.
Thanks
Dear EWM Gurus,
Is there a way we can create Inbound Delivery in EWM directly (without having an ERP system in place)?
I am having EWM system only and need to test few things around goods movement withing Warehouse and Yard activities.
I have tried to create ID directly in EWM in /SCWM/PRDI, it failed because VL60 from ERP will be called.
Same is the case with using EGR.
Is there a way I can trurn off all RFC calls made to ERP and proceed with Inbound Delivery creation in EWM alone?
Regards,
Shashidhar
Hi,
Can any one explain the step by step process related to inbound / outbound process..
from process and corresponding config in the system steps.
Hi
Once a Loading WT has been confirmed, how do you do the unloading so I can put another item on a already loaded HU (for ODO). Presently it gives the message, HU status does not allow packing (coz' it has been loaded completely). I cannot simple unload. I assume there is a way to create a new Unload WT, but can someone help me with the details
Hi gurus,
I create an outbound delivery in ERP and it is sent to EWM, EWM activates it automaticaly. Then I decide to cancel (delete) the outbound delivery. Altough the status of oubound delivery order is "not started", when i try to change it using VL02N system does not allow to change it. Posts an error message " The delivery was distributed, meaning that processing occurs in another system. The report back has not yet been received.".
What do you advice me to do.
Regards.
Hi,
How to trigger two or three different smart-forms (which are triggered using different PPF actions) on to the same spool?
Suppose I have two ppf actions
1. triggers X smartform.
2 triggers Y smartform.
one after the other. Now the requirement is get the both into one spool. I know we can do by open-spool and close-spool. But I'm not looking for this solution.
Is there any specific configuraation with PPFs?
Thanks,
Sandhya
Dear Gurus,
We are in EWM 9.0. In warehouse monitor bin stock available stock we are getting line items with -ve stock along with +ve stock items for the same material in the bin.
WHen we go to to the bin display /scwm/ls03 we get
There is physical stock in the bin and there is open warehouse task with the bin as the destination bin (inbound task)
What is the standard systembehaviour in this case and how to get rid of the -ve stock in warehouse monitor.
ANy response will be highly appreciated.
WIth Regards,
Malay
Dear All ,
Greetings for day.
Kindly guide me on below error while picking , i have stock as highlighted in storage type T051 but i am not able to pick from same.
Thanks
Jinoy
Hi,
I have two storage location in plant 001 which is Door and 002 which is used to keep stock for Final Putaway.
I made a inbound Delivery with receiving Storage location 001 and distribute delivery in EWM System.
As soon as i did the Goods receipt at Door and there is no issue or error at EWM Side.
But if i check the log in ERP System, system give me error
I have using Process in which Material receive at Door -- Stag -- Repack into Pallet -- Pallet Storage Type.
There is 2 Availability Grp in EWM 001 and 002 corresponding to each SL.
For Storage Type P002, I have maintained 002 and for rest of intermediate there is no grp assigned to any Storage Type.
Regards,
Pardeep malik